Wood pelleting machine
1. The initiation of variable-frequency drives and the programming of PLC systems enable remote control and real-time monitoring.
2. High output, low energy consumption; producing one ton of finished pellets requires only 45-50 kWh of electricity.
3. The minimal replacement expense for wearable components contributes to a reduction in overall operational costs.
4. The system features a reduced activation current (e.g., for an 850–280 kW motor, the idle current measures just 8–10 A), which prevents losses under no-load conditions and enables a greater share of motor power to be allocated to production processes.
The enclosure for the feed and compacted particle assembly unit in the economically priced wood pelleting machine is fabricated from robust stainless steel, providing superior longevity, abrasion resistance, and corrosion protection. The position of the outlet can be fully adapted to user requirements.
As the sector's initial dedicated drive system engineered for biomass pellet processing equipment, this motor incorporates high-coercivity NdFeB rare-earth magnets, yielding remarkable power compactness. Its physical size is roughly 45% more compact than that of three-phase induction motors of similar capability. The motor's permanent magnets are resilient to maximum operational heat levels of 180°C and exhibit a degradation rate under 5%, ensuring stable and dependable operation throughout prolonged use in high-temperature environments.
The motor is equipped with various protection measures, such as closed-loop control loop and temperature control system to ensure the safe and stable operation of the motor.
The permanent magnet motor directly rotates the spindle, eliminating the requirement for a reducer. This results in quiet operation, high energy efficiency, minimal malfunctions, and reduced manufacturing expenses.
With a compact design and integrated foot supports, the system maintains a stable center of gravity. Depending on ambient conditions, either a ducted ventilation cooling system or a separate fan-based cooling set can be installed.
Parameters
Model | Power（kw） | Capacity（t/h) | Motor cooling method |
ZQLKJ560 | 150+2.2+2.2+2.2 | 1.5-2.5 | Air cooling |
ZQLKJ700 | 185+2.2+2.2+2.2 | 3-4 | Water cooling |
ZQLKJ850 | 280+2.2+2.2+2.2 | 4-5 | Water cooling |
ZQLKJ960 | 355+2.2+2.2+2.2 | 6-7 | Water cooling |
Packaging and Shipping
About us
Jinan Taichang Transmission Machinery Co.Ltd was founded in 2004 with registered capital of 20 million Yuan(USD 3,000,000.00),plant building area of 40000㎡.More than 200 employees, including 10 senior engineers, 16 mechanical designers, 20 technicians, and is a research, development, production, and operating as one of the modern machinery manufacturing enterprises. Strong technical force, advanced production technology, perfect after-sales service. Our company is the largest professional manufacturer of all types and large production in the domestic same industry.
